|
Publications |
Synthesis of Nanocrystalline $\alpha$-Al2O3 from Nanocrystalline Boehmite Derived from High Energy Ball Milling of Gibbiste |
murty |
|
Publications |
High strength bulk nanostructured 2219 Al alloy produced by high energy ball milling and hot pressing |
murty |
|
Publications |
Dilatometric analysis on shrinkage behavior during non-isothermal sintering of nanocrystalline tungsten mechanically alloyed with molybdenum |
murty |
|
Publications |
Magneto-electric effect in multiferroic Ni 0.93 Co 0.02 Mn 0.05 Fe 1.95 O 4-$δ$/PbZr 0.52 Ti 0.48 O 3 particulate composites: dielectric, piezoelectric properties |
murty |
|
Publications |
Special Issue on Materials Science of Bulk Metallic Glasses-VII-Analysis of Bulk Metallic Glass Formation Using a Tetrahedron Composition Diagram that Consists of Constituent Classes Based on |
murty |
|
Publications |
Magnetoelectric effect of (100-x) BaTiO 3–(x) NiFe 1.98 O 4 (x= 20–80 |
murty |
|
Publications |
Formation and stability of equiatomic and nonequiatomic nanocrystalline CuNiCoZnAlTi high-entropy alloys by mechanical alloying |
murty |
|
Publications |
Microstructural studies on nanocrystalline oxide dispersion strengthened austenitic (Fe–18Cr–8Ni–2W–0.25 Y2O3) alloy synthesized by high energy ball milling and vacuum hot pressing |
murty |
|
Publications |
MECHANICAL ACTIVATION OF alpha-Al 2 O 3 FORMATION FROM Al (OH) 3 USING HIGH ENERGY BALL MILLING |
murty |
|
Publications |
INVESTIGATION OF THICK TIN PROTECTIVE COATINGS ON COPPER WITH THE AID OF X-RAY PHOTOELECTRON SPECTROSCOPY |
murty |
|
Publications |
XRD Characterization of Microstructural Evolution During Mechanical Alloying of W-20 wt% Mo |
murty |
|
Publications |
Enhanced mangnetoelectric voltage in multiferroic particulate Ni 0.83 Co 0.15 Cu 0.02 Fe 1.9 O 4-$δ$/PbZr 0.52 Ti 0.48 O 3 composites-dielectric, piezoelectric and magnetic properties |
murty |
|
Publications |
Analysis of composition dependence of formation of ternary bulk metallic glasses from crystallographic data on ternary compounds |
murty |
|
Publications |
Spark plasma sintered Sm2Co17–FeCo nanocomposite permanent magnets synthesized by high energy ball milling |
murty |
|
Publications |
Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying |
murty |
|
Publications |
Microstructure and Creep Properties of Nanocrystalline Oxide Dispersion Strengthened Fe-18 Cr-8 Ni-2 W-0. 25 Y 2 O 3 Austenitic Steel Synthesized by High Energy Ball Milling and Vacuum Hot Pressing |
murty |
|
Publications |
Effect of milling energy on mechanical activation of (Mo+ Si< sub> 3</sub> N< sub> 4</sub>) powders during the synthesis of Si< sub> 3</sub> N< sub> 4</sub>–MoSi< sub> 2</sub>< i> in situ</i> composites |
murty |
|
Publications |
Ultrafine Grained-High Strength NiAl with dispersion of Al< sub> 2</sub> O< sub> 3</sub> and Al< sub> 4</sub> C< sub> 3</sub> nano-sized particles by Mechanical Alloying in Toluene and Spark Plasma Sintering |
murty |
|
Publications |
Initial-stage sintering kinetics of nanocrystalline tungsten |
murty |
|
Publications |
Investigation and characterization of Pb (Zr< sub> 0.52</sub> Ti< sub> 0.48</sub>) O< sub> 3</sub> nanocrystalline ferroelectric ceramics: By conventional and microwave sintering methods |
murty |
|
Publications |
Materials science communications |
murty |
|
Publications |
Electrical and Magnetic Properties of Nanocrystalline BiFeO3 Prepared by High Energy Ball Milling and Microwave Sintering |
murty |
|
Publications |
Synthesis and characterization of nanocrystalline AlFeTiCrZnCu high entropy solid solution by mechanical alloying |
murty |
|
Publications |
Effect of yttria particle size on the microstructure and compression creep properties of nanostructured oxide dispersion strengthened ferritic (Fe–12Cr–2W–0.5 Y< sub> 2</sub> O< sub> 3</sub>) alloy |
murty |
|
Publications |
Effect of milling energy on mechanical activation of (Mo+ Si 3 N 4) powders during the synthesis of Si 3 N 4-MoSi 2 in situ composites |
murty |