|
Publications |
Synthesis of copper–alumina nanocomposite by reactive milling |
murty |
|
Publications |
Thermo-mechanical treatment of Al-5Ti-1B and Al-5Ti master alloy on its grain refining performance on aluminium |
murty |
|
Publications |
Thermodynamic prediction of bulk metallic glass forming alloys in ternary Zr–Cu–X (X= Ag, Al, Ti, Ga) systems |
murty |
|
Publications |
INFLUENCE OF MILLING MEDIA ON KINETICS OF CuO/Cu 2 O REDUCTION BY Al DURING HIGH-ENERGY BALL MILLING |
murty |
|
Publications |
Effect of rolling on Al-5Ti binary master alloy (sponge route) and its grain refining performance in aluminium |
murty |
|
Publications |
Aluminium based metallic films |
murty |
|
Publications |
Micro indentation study on Cu< sub> 60</sub> Zr< sub> 20</sub> Ti< sub> 20</sub> metallic glass |
murty |
|
Publications |
Effect of hot rolling and heat treatment of Al–5Ti–1B master alloy on the grain refining efficiency of aluminium |
murty |
|
Publications |
Effect of Ti addition on the grain refining potency of TiB 2 in Al and Al-7 Si alloys. |
murty |
|
Publications |
Thermodynamic Basis for Glass Formation in Cu-Zr Rich Ternary Systems and Their Synthesis by Mechanical Alloying |
murty |
|
Publications |
Mechanical and electrical properties of Cu–Ta nanocomposites prepared by high-energy ball milling |
murty |
|
Publications |
Settling behaviour of TiAl 3, TiB 2, TiC and AlB 2 particles in liquid Al during grain refinement |
murty |
|
Publications |
Internal friction and longitudinal modulus behaviour of multiferroic PbZr 0.52 Ti 0.48 O 3+ Ni 0.93 Co 0.02 Mn 0.05 Fe 1.95 O 4-$δ$ particulate composites |
murty |
|
Publications |
Corrosion characterization on melt spun Cu< sub> 60</sub> Zr< sub> 20</sub> Ti< sub> 20</sub> metallic glass: An experimental case study |
murty |
|
Publications |
Synthesis of CuW Nanocomposite by High-Energy Ball Milling |
murty |
|
Publications |
Influence of thermo-mechanical processing of Al–5Ti–1B master alloy on its grain refining efficiency |
murty |
|
Publications |
Prediction of Bulk Metallic Glass Formation in Cu–Zr–Ag–Hf System by Thermodynamic and Topological Modeling |
murty |
|
Publications |
Development of Al–Ti–C grain refiners and study of their grain refining efficiency on Al and Al–7Si alloy |
murty |
|
Publications |
CHARACTERIZATION OF NANOCOMPOSITES BY USING PHASE IMAGING AND FORCE VOLUME IMAGING TECHNIQUES OF ATOMIC FORCE MICROSCOPY |
murty |
|
Publications |
Influence of thermo-mechanical treatment of Al–5Ti master alloy on its grain refining performance on aluminium |
murty |
|
Publications |
Thermodynamic criteria for bulk metallic glass formation in Zr rich quaternary system |
murty |
|
Publications |
Influence of heating rate on the microstructure and magnetic properties of Fe< sub> 3</sub> B/Nd< sub> 2</sub> Fe< sub> 14</sub> B nanocomposite magnets |
murty |
|
Publications |
Ferromagnetic-dielectric Ni 0.5 Zn 0.5 Fe 1.9 O 4-$δ$/PbZr 0.52 Ti 0.48 O 3 particulate composites: electric, magnetic, mechanical, and electromagnetic properties |
murty |
|
Publications |
On icosahedral phase formation in mechanically alloyed Al< sub> 70</sub> Cu< sub> 20</sub> Fe< sub> 10</sub> |
murty |
|
Publications |
Analysis of bulk metallic glass formation using a tetrahedron composition diagram that consists of constituent classes based on blocks of elements in the periodic table |
murty |